Heating Elevation

For efficient heating the crop heat tubes must be brought as close to the crops or plants as possible.

For efficient heating the crop heat tubes must be brought as close to the crops or plants as possible.
In a heating elevation system the crop heat tubes hang on the ideal distance to the crops but can be lifted when needed for instance for water supply, harvesting or soil cultivation.
Many greenhouses have lift systems; for heating activities (in combination with the wire netting for the plants) the system is lifted simultaneously with the crop growth. It might lift to the top several times a day for instance for water supply.
It goes without saying that this lifting needs a most reliable motor. As a decisive feature the motor has to be 100% self-braking and capable of withstanding these high loads.

Mobile Heating Elevation

For elevating crop heat tubes or for heating on long layers combined with wire netting, the torque tubes will be driven by a self-braking gearbox which has been mounted to the joist. Only one mobile gear motor is required to drive each of the gearboxes one by one. This means low installation costs as only one motor has to be connected electrically. The motor can easily be connected to the worm gearboxes.
The gearboxes are self-braking and over the years they have proven to be long-lasting and reliable.

Technical Specificatioins

3-PHASE MOTORS

T20-20-10 200

REDUCTION GEARBOXES

GEARBOXES WORM GEAR

W3-80 800
W3-100 1000
W7-150 1500
W2-30 300
W2-40 400

ACCESSORIES

KG
KK
KS

INSTRUCTIONS >>

TECHNICAL INFORMATION >>

BACK TO Heating Elevation
FaLang translation system by Faboba